Is your system is not working accurately? No worries, you need to check your heating and cooling system. You couldn’t get comfort and peace of mind if your system is not working efficiently. By following these simplest steps, I am sure you get a comfortable environment in your home! If your thermostat is not installed correctly, it could become the cause of the defect in your heating and cooling system. So you need to maintain your system properly for better results. Here are some maintenance tips that could help you to check your thermostat that is it working correctly or not?
Hire a professional service
If your system is not working accurately, you should check the certain defect in thermostat. If the fault is not complicated, you could easily DIY remove it. But if you are not experienced in this work, you could hire a professional staff. They will clean the internal part of the system and remove the all complicated defects.
Replace the dirty filter
Check your thermostat filters on the monthly basis and if you find any dirt or any error in the system, replace the air filters. Did you know that replacing air filters could become the source of lower energy consumption? You could save 15% on proper maintenance.
Dirty filters could affect the working of the system, and could damage your system. Another main issue of the dirty filter is that it could become the cause of dirty environment. When your system works with dirty filters, it could increase the risk of allergies. So you need to clean any visible dirt inside the system.
Keep your thermostat away from direct sunlight
Don’t adjust your system in direct sunlight or near the heated area of your home. If you want an efficient system for a long time, you need to place your thermostat at the cool and dry place. So you will get the best outcomes.
Tight the electrical connections
You should change the batteries if need to replace and tighten the electrical wirings. You need to check the cable connections of your system. You must replace if you find any defect in the wire. If you inspect that any wire is loose, tight it correctly.
There are many latest models are available that use the batteries. It is recommended changing the batteries within a one year. If the batteries are not working efficiently or running low, it could affect the system performance. So, you should be caution about all defects in your system as a little defect could decrease its efficiency and waste the energy.
Replace your thermostat
You should set your thermostat temperature high in the hot summer season and low in winter. It is better to set 78 degrees in warmest days and try to adjust 70 degrees in winter months. Did you know that every degree that you change have a great effect on energy consumption? The proper use of thermostat cold saves you 5% energy usage! Therefore, if you are still using a manual system, I would recommend you to replace your outdated system with the newest model of the programmable thermostat as It guaranteed to save you lot of buck! A wifi thermostat allows you to set temperature according to your schedule.
Lubricate the moving part in thermostat
The next most significant step is to lubricate all parts inside the thermostat as lubricated nuts, moving parts could save you from unnecessary expenses, and could give you best results. You also need to clean the coils in the system. Also, check all wiring in the connection as any broken, loose or over tight cables could become the cause of serious injuries. So the proper care is necessary for the excellent performance of your system.
Did you know that an accurate and efficient system help you to adjust the temperature of your home or office properly? So if your system is not working properly, you should follow some maintenance tips to maintain your heating or cooling system. Keep in minds that proper care of machine could increase its life. I would suggest you that check your thermostat on the weekly basis and if you find any defect in the system try to remove it.Related posts: